Sysmex XP-300 13-19
Troubleshooting
January 2012
11. External Output Errors (when connected with optional equipment)
Error Message
(Error Code)
HC Buffer Full (441010)
Cause • Computer connecting cable failure
• Computer is not turned ON or not ready for communication.
• Host computer serial interface error
Action • Inspect the host computer.
• Inspect the connection cable.
Troubleshooting
on the screen
Press the [Back]
button to clear the error.
However, the data under printing will be printed. Other data
will be deleted.
Note Analysis is ready when the error is cleared.
Error Message
(Error Code)
LAN no Response (486000)
Cause • Computer connecting cable failure
• Computer is not turned ON or not ready for communication.
• LAN connector for host computer failure
Action • Inspect the host computer.
• Inspect the connection cable.
Troubleshooting
on the screen
• Press the [Retry] button to clear the error, and the
transmission to LAN is restarted.
• Press the [Cancel] button to clear the error. All data for
LAN output is deleted.
Note Analysis is ready when the error is cleared.
Error Message
(Error Code)
LAN Buffer Full (486030)
Cause The amount of data for output or printout is too large to be processed.
Action Troubleshooting
on the screen
Press the [Back]
button to clear the error.
However, the data under printing will be printed. Other data
will be deleted.
Note Analysis is ready when the error is cleared.
To Next Page
Loading...
