14-2 Sysmex XP-300
Technical Information
Revised October 2012
Control material EIGHTCHECK-3WP
Consumption of
reagent (per sample)
Diluent
(CELLPACK)
WBC/HGB lyse reagent
(STROMATOLYSER-WH)
Detergent
(CELLCLEAN)
During
analysis
(Whole blood mode)
Approx. 34 mL
Approx. 1 mL –
(Pre-diluted mode)
Approx. 34 mL
Approx. 1 mL –
During start
up
(when the background
check is performed once)
Approx. 86 mL
Approx. 3 mL –
(when the background
check is performed
three times)
Approx. 154 mL
Approx. 5 mL –
During
Auto Rinse
(when the background
check is performed once)
Approx. 85 mL
Approx. 2 mL –
(when the background
check is performed
three times)
Approx. 153 mL
Approx. 4 mL –
During Shutdown
Approx. 86 mL
–
Approx. 0.3 mL
Throughput Approx. 60 samples/hour
Data storage Up to 40,000 with histogram
Quality control 60 plots × 6 files
Required sample
volume
WB mode Approx. 50 µL
PD mode Approx. 20 µL
Blood volume
aspirated
Whole blood mode: Approx. 50 µL
Pre-diluted mode: Approx. 200 µL (Diluted blood sample)
Blood volume required for the pre-dilution is 20 µL or over.
Analysis principle WBC: DC detection method
RBC/PLT: DC detection method
HGB: Non-cyanide hemoglobin analysis method
To Next Page
Loading...
