SYSMEX XP Series - Page 266

14-36 Sysmex XP-300
Technical Information
Revised October 2012
8) 3C Histogram with T1 but without T2
WBC and lymphocyte parameters (LYM%, LYM#) are not flagged as the histogram error.
Mixed cell and neutrophil parameters (MXD%, NEUT%, MXD#, NEUT#) are flagged with T2
and data are not output.
WBC shown below exceeds the upper Patient Mark Limits.
• WBC Histogram Error-T2 (3C)
9) 3D Histogram with high T1 but no T2, and with high UD
WBC is flagged with WU. Lymphocyte parameters (LYM%, LYM#) are not flagged. Mixed
cell and neutrophil parameters (MXD%, NEUT%, MXD#, NEUT#) are flagged with T2 and
their data are not output.
10) 4A Histogram with high T1
WBC and neutrophil parameters (NEUT%, NEUT#) are not flagged. Lymphocyte parameters
(LYM%, LYM#) are flagged with F1 and mixed cell parameters (MXD%, MXD#) are flagged
with F2.
• WBC Histogram Error - F1 (4A)
11) 4B Histogram with high T1 and UD
WBC is flagged with WU, lymphocyte parameters (LYM%, LYM#) are flagged with F1, and
mixed cell parameters (MXD%, MXD#) with F2. Neutrophil parameters (NEUT%, NEUT#) are
not flagged.
300
WBC
UDLD T1
[fL]
200100
WBC +15.2 [×10
3
/µL]
LYM% 12.9 [%]
MXD% T2 ---.- [%]
NEUT% T2 ---.- [%]
LYM# 1.6 [×10
3
/µL]
MXD# T2 ---.- [×10
3
/µL]
NEUT# T2 ---.- [×10
3
/µL]
WBC
LD T1 T2
UD
300200100 [fL]
WBC 6.7 [×10
3
/µL]
LYM% F1 28.3 [%]
MXD% F2 17.4 [%]
NEUT% 54.3 [%]
LYM# F1 1.9 [×10
3
/µL]
MXD# F2 1.2 [×10
3
/µL]
NEUT# 3.6 [×10
3
/µL]