23
Cold water
injection (ES
machines only)
This option is used to set the amount of cold water for IN products, using
cold water injection. (ES machines only).
The settings options are as follows
NOTE: These temperatures settings are only intended as a guide; they may
change slightly as scaling grows inside the tank.
Setting quantities
(ES-machines
only)
Cold water injection
setting
(amount of cold water
added to the hot water
dispensing)
Approximate tempera-
ture in mixing bowl
Best suited for:
HIGH 75°C - 80°C Chocolate, whitener
MEDIUM 78°C - 82°C Tea water
LOW 82°C - 87°CIN coffee
0FF >85°C None
(Temperature is unpre-
dictable, but the
Step Action Function
1.
Press: The display reads "Press Selec-
tion".
2.
Press the selection button of the
drink, for which the ingredients are
to be set.
The display reads first component.
3.
From the above menu you have the following options:
If you want then go to step
to select a specific drinks option 4
to enter the specific drinks option: 5
• to decrease the quantity or value
• to toggle between the options in cold
water injection
6
• to increase the quantity or value
• to toggle between the options in cold
water injection, or
• in "Test drink" to activate the test.
7
to return to the Quantities option. 8
to access the next function 9 and 10
To Next Page
Loading...
