1 General Information
This manual describes the LS-5 two breakers variant:
• LS-5x2 v2 series device congured and used as LS-5x2 v2
For details please refer to chapter ╚═▷ Chapter 2.
1.1
About This Manual
1.1.1 Revision History
Rev. Date Editor Changes in chronological descending order
NEW 2017-05 GG, MK 1st Release with
• software version §[y.textvar/@name=software.version]
and
• ToolKit version 5.6.3 or higher
A 2020-01 TM The issue with an inhibited dead bus closure CBA in the LS-5x2 device is solved. It could
lead to an internal inhibited dead bus closure CBA if the LS5x2 is congured as tie-
breaker device (not direct mains connected). Softwareversion 2.0007.
Introduction of a Closed Transition Monitoring.
Default settings TPDO1. With the default setting the data telegram 5301 is not send
anymore.
Introduction of a Synchronization type (one phase or three phase).
14 LS-5 v2 Series 37650
1 General Information