Woodward LS-5 v2 Series - 5.2.3.14 System a Decoupling Thresholds

5.2.3.14 System A Decoupling Thresholds
Restricted Access
The function 'System A Decoupling Thresholds' is available on Code level CL3. Code
levels CL0 to CL2 are intentionally not supported. Refer to chapter ╚═▷ “4.1.3 Enter
Password” for details.
Fig. 126: Status of test (example)
Softkey Description
TEST ON Starts a test mode which allows a comfortable system A decoupling
con󰈡guration.
TEST OFF Stops a test mode which allows a comfortable system A decoupling
con󰈡guration.
Fig. 127: For decoupling valid / not valid (example)
Softkey Description
Increments decoupling value setpoint. When pressing the button
permanent the value changes faster.
Decrements decoupling value setpoint. When pressing the button
permanent the value changes faster.
Symbol Description
Indicates parameters that are part of the system A decoupling
con󰈡guration.
The buttons and navigate through the following thresholds which can be
adjusted:
248 LS-5 v2 Series 37650
5 Operation
5.2 Front Panel Access
Released