Woodward LS-5 v2 Series - Page 271

Fig. 145: LogicsManager con󰄢guration example 1
The mains decoupling function is only enabled, if an external release is given (Discrete
Input 3).
In this case a PLC is required.
7. ▷
LogicsManager con󰆟guration example 2
Fig. 146: LogicsManager con󰄢guration example 2
The mains decoupling function is enabled, if a "Test" key switch is activated.
This helps to perform a mains decoupling test without any generator
running.
271LS-5 v2 Series37650
6 Application
6.4 Setup easYgen & Independent LS-5x2 Applications (Mode A02)
Released