Woodward LS-5 v2 Series - Page 401

[Sx] - Sign {x}
1 [True; always "1"] The value [Cx] is ignored and this logic path will
always be TRUE.
Tab. 38: Signs
[Ox] - Operator {x}
AND Logical AND
NAND Logical negated AND
OR Logical OR
NOR Logical negated OR
XOR Exclusive OR
NXOR Exclusive negated OR
Tab. 39: Operators
For the various display formats of the corresponding logical symbols refer to ╚═▷ “9.3.2
Logical Symbols”.
Con󰂢guration of the command chain
Using the values speci󰈡ed in the above table, the chain of commands of the
LogicsManager (for example: operating the relays, setting the 󰈢ags, speci󰈡cation of the
automatic functions) is con󰈡gured as follows:
[Ax] = ( ( [C1] & [S1] ) & [O1] & ( [C2] & [S2] ) ) & [O2] & ( [C3] & [S3] )
401LS-5 v2 Series37650
9 Appendix
9.3 LogicsManager Reference
Released