2nd DST ends on the 2nd congured
weekday of the DST begin month.
3rd DST ends on the 3rd congured
weekday of the DST begin month.
4th DST ends on the 4th congured
weekday of the DST begin month.
[Last] DST ends on the last congured
weekday of the DST begin month.
LastButOne DST ends on the last but one
congured weekday of the DST begin
month.
LastButTwo DST ends on the last but two
congured weekday of the DST begin
month.
LastButThree DST ends on the last but three
congured weekday of the DST begin
month.
Notes
This parameter is only displayed, if
Daylight saving time
(parameter 4591) is set to "On".
4596 DST end month 2 1 to 12
[10]
The month for the DST begin date is
congured here.
Example
• 1 = 1st month of the year
• 12 = 12th month of the year
Notes
This parameter is only displayed, if
Daylight saving time
(parameter 4591) is set to "On".
Example
If daylight saving time starts at 2:00 am on the 2nd Sunday in March and ends at 2:00 am
on the 1st Sunday in November, the unit has to be congured like shown in ╚═▷ Tab. 11
to enable an automatic change to daylight saving time and back to standard time.
79LS-5 v2 Series37650
4 Conguration
4.1 Basic Setup