USER GUIDE (MACHINE
ADMINISTRATOR)
4–33
U
SER
G
UIDE
(M
ACHINE
A
DMINISTRATOR
)
Color Shift This sets up the default for Color Shift on the Image Quality
screen.
Enter the setting using the number buttons listed in the following
table. The default is 2, Normal.
Color Balance - Yellow,
Magenta, Cyan, Black
This sets up the default for each density level, Low Density,
Medium Density, and High Density, for Yellow, Magenta, Cyan and
Black in Color Balance on the Image Quality screen.
The defaults are all 0.
NOTE: The values set here will be applied to B/W and Single
Color modes.
Original Orientation This sets up the default for Original Orientation on the Scan
Options screen.
Enter the setting using the number buttons listed in the following
table. The default is 0, Head to Top.
Setting Description
0
-20°
1
-10°
2
Normal
3
+10°
4
+20°
Setting Description
0
Head to Top
1
Head to Left
To Next Page
Loading...
Need help?
General
