System Setup
9 - 181
9.15.3.6 Momentary output allocation
Set this function in the KEY ALLOCATION (SIM) window.
1. Move the cursor to the “FUNCTION” of the key to be allocated and press [SELECT].
– A selection list appears.
2. Select “MOMENTARY OUTPUT”.
– The output No. is displayed in the “ALLOCATION CONTENT”.
1) To change the output No., move the cursor to the No. and press [SELECT]. Then
numeric value can be entered.
2) Input the number to be changed, and press [ENTER].
9.15.3.7 Pulse output allocation
Set this function in the KEY ALLOCATION (SIM) window.
1. Move the cursor to the “FUNCTION” of the key to be allocated and press [SELECT].
– A selection list appears.
2. Select “PULSE OUTPUT”.
– The output No. and output time are displayed in the “ALLOCATION CONTENT”.
1) To change the output No. or output time, move the cursor to the No. or time and press
[SELECT]. Then numeric value can be entered.
2) Input the number or time to be changed, and press [ENTER].
To Next Page
Loading...
