System Setup
9 - 191
9.18.3 Initializing parameter files
1. Turn the power supply ON while pressing [Main Menu] simultaneously.
2. The SECURITY mode is changed to the MANAGEMENT mode.
3. Select {FILE} under the main menu.
4. Select {INITIALIZE}.
5. Select {PARAMETER}.
– The parameter selection window appears.
6. Select the parameter to be initialized.
– The selected data is marked with " ".
– The I/O data marked with "" cannot be selected.
7. Press [ENTER].
– A confirmation dialog box appears.
8. Select {YES}.
– The parameter data is initialized.
To Next Page
Loading...
