System Setup
9 - 193
9.18.5 Initializing system data
1. While pressing the main menu key, turn the power OFF then back ON.
2. The SECURITY mode is changed to the MANAGEMENT mode.
3. Select {FILE} under the main menu.
4. Select {INITIALIZE}.
5. Select {SYSTEM DATA}.
– The System data selection window appears.
6. Select the parameter to be initialized.
– The selected data is marked with " ".
– The I/O data marked with "" cannot be selected.
7. Press [ENTER].
– A confirmation dialog box appears.
8. Select {YES}.
– The selected data is initialized.
To Next Page
Loading...
