System Setup
9 - 185
9.15.5 Execution of allocation
9.15.5.1 Executing the Instruction/Output control allocation
1. Press the key allocated for instruction allocation or output control allocation.
– The allocated instruction is displayed in the input buffer line.
2. Press [INSERT] and [ENTER]
– The instruction displayed in the input buffer line is registered
9.15.5.2 Executing the JOB call allocation
1. Press the key for JOB call assignment.
– The CALL instruction is displayed in the input buffer line.
2. Press [INSERT} and then press [ENTER].
– The CALL instruction shown in the input buffer line is registered.
9.15.5.3 Executing the display allocation
1. Press the key allocated for the display allocation.
– The allocated display appears.
9.15.5.4 Executing the I/O control allocation
Alternate output allocation, momentary output allocation, pulse output allocation, group
output allocation (4-bit/8-bit), analog output allocation, analog incremental output allocation
are executed by the following operation.
1. Press the interlock key and the key allocated for I/O control allocation at the same time.
– Allocated functions are executed.
To Next Page
Loading...
