Modification of System Configuration
13 - 362
13 Modification of System Configuration
13.1 Addition of I/O Modules
To add I/O modules, turn OFF the power supply
NOTICE
Addition operation must be performed in the MANAGEMENT mode. In the OPERATION
mode or EDITING mode, only reference of status setting is possible.
1. Turn the power supply ON while pressing [Main Menu] simultaneously.
2. The SECURITY mode is changed to the MANAGEMENT mode.
3. Select {SYSTEM} from the main menu.
– The system window appears.
4. Select {SETUP}.
– The SETUP window appears.
– The I/O data marked with "" cannot be selected.
5. Select {IO MODULE}.
– The current status of the mounted I/O module is shown.
To Next Page
Loading...
