Security system
8 - 76
8.3 User ID
User ID is requested when the editing mode, management mode or safety mode is
operated.
The user ID should be 4 or more and 16 or less characters with number(s) and symbol(s)
for the editing mode and the management mode. As for the safety mode, it should be 9 or
more and 16 or less characters with number(s) and symbol(s).
In order to change the user ID, the robot controller must be in the
• EDITING MODE,
• MANAGEMENT MODE
• or the SAFETY MODE.
Higher security modes can make changes the user ID of to lower security modes.
Changing User ID:
1. Select {SETUP} under the main menu.
The sub menu appears.
2. Select {USER ID}.
The USER ID window appears.
To Next Page
Loading...
