System Setup
9 - 183
9.15.3.10 Analog incremental output allocation
Set this function in the KEY ALLOCATION (SIM) window.
1. Move the cursor to the “FUNCTION” of the key to be allocated and press [SELECT].
– A selection list appears.
2. Select “ANALOG OUTPUT”.
– The output port number and the output voltage value are displayed in the
“ALLOCATION CONTENT”.
1) To change the output port No. or output voltage value, move the cursor to the No. or
voltage value and press [SELECT]. Then numeric value can be entered.
2) Input the number or voltage value to be changed, and press [ENTER]
To Next Page
Loading...
