System Backup
10 - 350
Indicates the existence of the files or the number of backup files stored in the SD card
inserted when this window is displayed.
LATEST BACKUP FILE
Indicates the date of the latest file in the SD card inserted when this window is
displayed.
ARRANGE
When the setting of maximum number of stored files is changed, the file arrangement
of the backup files in the SD card is executed.
With this operation, the file arrangement can be performed without changing the
maximum number of stored files.
ARRANGE will not be displayed when the device of the SD card: controller is set on.
5. Set the desired item, and press [ENTER].
Window Settings
RS parameter can restrict the settings of some items in the automatic backup window.
When setting the bit of RS096 parameter shown below to "1", the corresponding items
are restricted. The restricted items are indicated with "INVALID" in the display and
inputting/modification to the item becomes impossible. Also, the automatic backup does
not function with the restricted items.
Output the Backup Processing Status
Able to confirm the backup processing status by the system output signal.
<#50766> It is creating the auto backup data.
When this signal is turned ON, it is creating the backup data. Some operations are
limited. For example, the start signal is not accepted.
<#50767> It is transferring the backup data.
When this signal is turned ON, writes the data to the SD card after creating the backup
data. Do not remove the SD card from the programming pendant during this period.
RESERVE TIME BACKUP
MODE CHANGE BACKUP
STARTUP BACKUP
RETRY CYCLE
DURING ALARM BACKUP
SPECIFIC INPUT BACKUP
1
D5 D4 D3 D2 D1 D0D6D7
1
2
3
4
5
6
2
3
4
5
6
To Next Page
Loading...
