Robot controller specification
14 - 396
Cooling System of the controller interior
The backside duct fan draws in air from the air intake and expels it from the air outlet to cool
the SERVOPACK. The fan mounted inside the door circulates the air to keep temperature
even throughout the interior of the robot controller. Make sure the door of the robot
controller is closed when it’s used to keep this cooling system effective.
GP12 ERAR-1000-06VXH25-E10
AR1440
GP25
AR1700
Cooling system
Backside duct fan
Air inlet
Air outlet
Heat exchanger
Robot model YRC1000 controller
1
2
3
4
To Next Page
Loading...
