Ascotel IntelliGate 2025/2045/2065
218 Routing elements Part 2
Rerouting in the Exchange
The "Rerouting in the exchange" setting can be used to specify whether the sys-
tem is authorized to place exchange-to-exchange connections to the exchange via
the trunk group's exchange lines. If the exchange lines of two trunk groups are
involved, this connection privilege must be granted to both trunk groups (see also
"Transferring Call Forwarding Unconditional to the Exchange", page 328).
This setting is possible only for trunk groups with protocol = DSS1.
Hold and Three-party Conference in the Exchange
For three-party conference in the exchange see "Three-Party Connections in the
Exchange", page 331.
"Truncate DDI" Setting
See "Direct Dialling Plan (DDI plan)", page 223.
Other Trunk Group-related Subjects:
Network interfaces, Route, Incoming traffic, Outgoing traffic, Traffic in
the PISN, Identification elements.
To Next Page
Loading...
