Ascotel IntelliGate 2025/2045/2065
Part 7 Data Maintenance 889
The main memory for program and data is on the SDRAM card. When the PBX
starts up, the system software on the serial Flash memory is decompressed and
loaded into the main memory.
2.1.2 Boot software
The boot software is stored on the Flash board in a parallel Flash memory.
2.1.3 Configuration data
There are two categories of configuration data:
• System configuration data
• Terminal configuration data
This data is stored in parallel memories on the Flash card.
2.1.3.1 System configuration data
The System Configuration data contains all the settings for the System Configu-
ration with the exception of the terminal-specific settings.
The system configuration data is stored on the Flash card in a parallel Flash mem-
ory and saved during AIMS backup.
System configuration data can only be modified using AIMS.
2.1.3.2 Terminal configuration data
The terminal configuration data includes all the terminal-specific settings such as
• private phone books
• key assignments
• terminal settings such as volume, ringing melody, etc.
Terminal configuration data is available only for system terminals of the Office
family. It is stored in a parallel Flash memory and saved during the AIMS backup.
To Next Page
Loading...
