Aastra Ascotel IntelliGate 2025 - 8.1.3 Office20, Office30, Office40

Ascotel IntelliGate 2025/2045/2065
822 Installing terminals Part 4
3. Feed the connecting cable through the strain relief on the terminal and on the
EKP.
4. Plug the terminal connecting cable into the socket.
Fig. 4.84: Installation of the AKB as shown in the example of the Office 45 with EKP
8.1.3 Office 20, Office 30, Office 40
Installation
1. Set the AD2 bus address under the terminal's designation label.
– TSD1 = Address switch not pressed (disengaged)
– TSD2 = Address switch pressed (engaged)
2. Plug the coiled cable into the handset.
3. Plug the connecting cable to the terminal and feed it through the strain relief.
4. Plug the cable into the socket.
5. If the system is configured, test the operation of the terminal.
6. Label the telephone.
haz1261aaxxa0