Aastra Ascotel IntelliGate 2025 - 8.4.21 Taking over an active connection

Ascotel IntelliGate 2025/2045/2065
Part 2 Features 517
System configuration
Tab. 2.249: Appointment call: System configuration
8.4.21 Taking over an active connection
Preliminaries
A subscriber D can enable subscriber C to take over an existing voice or data con-
nection A-B.
Fig. 2.205: Preparing to take over an active connection
Detailed Description
Tab. 2.250: Preparing to take over an active connection
Parameter Parameter value Remarks
No settings
Interface Operating sequence / signalling on the terminal Scope
B Subscriber B obtains the busy tone once C has
taken over the connection to A.
Possible interfaces:
Internal
C Possible interfaces:
Internal
D After preparing to take over the call or taking
back the preparations for taking ver the call, D
obtains the acknowledgement tone.
Requirement:
Authorization has been enabled in the
subscriber configuration. This authoriza-
tion can be set separately for voice and
data connections.
AB
DC
haz0209aaxxb0