Aastra Ascotel IntelliGate 2025 - 2.2 Connection options

Ascotel IntelliGate 2025/2045/2065
Part 5 AIMS configuration tool 837
AIMS does not depend on the sales channel or language. A sales channel is
defined for each new PBX created with AIMS. With the command "Tools – Set/
Change Sales Channel" in the AIMS Shell the PBX carries out an initialization with
the corresponding initialization values.
Note:
AIMS 6 is backwards compatible, i.e. AIMS 6 can also be used to config-
ure ISDN 5 systems
1)
.
Besides the Configuration Manager, AIMS also features a number of other Man-
agers for related tasks (see "Ascotel Information Management System (AIMS)",
page 144).
Communication protocol
The TCP / IP communication protocol is used for communications between PBX
and PC. The PPP protocol is used for serial connections (via V.24 for example). To
be able to set up such a connection, you need to ensure that the appropriate PPP
software is installed on the PC (see "Settings on the PC", page 841).
2.2 Connection options
Overview of connection options
Tab. 5.1: Connection options for configuration with AIMS
1)
As of PBX software version 5.2
Access Connection on the PC Connection on the PBX Effective data trans-
mission rate
Local access (internal)
• via V.24 interface V.24 interface V.24 interface approx. 130 kbit/s
• via Pocket Adapter V.24 interface AD2 interface approx. 10 kbit/s
Dial-up access
• internal access ISDN TA or ISDN PC card S interface 64 kbit/s
• external access (via the
public network)
ISDN TA or ISDN PC card Network interface 64 kbit/s
LAN (Ethernet) Ethernet interface Ethernet interface (on the
basic system)
10 Mbit/s