Ascotel IntelliGate 2025/2045/2065
Part 5 AIMS configuration tool 839
2.2.2 Connection options for external access
An Ascotel IntelliGate can be configured remotely via the public network. This
requires a PC with access to the public network either via an ISDN card or a
Terminal Adapter, either directly via an NT1 or via a PBX. If the PC has an ISDN
card, the connection can be made directly via the S interface.
[1] PC with Terminal Adapter on the S interface of an NT1 or PBX
[2] PC with ISDN card on the S interface of an NT1 or PBX
Fig. 5.3: Connection options for external access for PBX configuration
Cables for external access
• For [1], supplied Terminal Adapter cable
2.2.3 Connection option for LAN access
Access via LAN is connected via the Ethernet interface on the mainboard. The
Ethernet interface settings are made using the AIMS Configuration Manager. The
current settings can also be viewed with System Assistant. For the initialization
values see "Ethernet Interface", page 799.
TA
NT1
(PBX)
NT1
(PBX)
V.24 S T (T/T2)
S S T (T/T2)
T/T2
ISDN
PBX
configu-
ration
haz0759aaenc0
[1]
[2]
PC/T
COM
port
PC
ISDN
cart
To Next Page
Loading...
