Ascotel IntelliGate 2025/2045/2065
Part 2 Routing elements 243
• They can be the destination of a Call Forwarding Unconditional or Call For-
warding on No Reply, even if the diverting subscriber is still a member of a dif-
ferent user group.
• Any call diversion or call forwarding (even internal) by a UG member automat-
ically results in the member being switched out of the user group. If there is
only one member left in the subscriber group, that member cannot activate
CFU or CFNR and therefore cannot be switched out of the user group.
Note: In Twin Mode both the DECT handset and the corded terminal have to
be entered in the user group.
• If a member makes outgoing external calls without a direct dialling number the
direct dialling number of the user group is not used as CLIP.
4.6.3 User Groups for Voice Mail and Other Applications
User group 17 (System 2025 / 2045) and 25 (System 2065) have been designed
to accommodate a Voice Mail server.
User groups 18 to 21 (System 2025 / 2045) and 26 to 29 (System 2065) are pro-
vided for applications that require a call forwarding to a user group.
These user groups differ from ordinary user groups in the following way:
• In the case of calls to these user groups UG subscriber redirections are not car-
ried out. Callers who dial the subscriber in the user group directly are however
diverted.
• They can be the destination of a Call Forwarding Unconditional or Call For-
warding on No Reply, even if the diverting subscriber is still a member of a dif-
ferent user group. In each case redirections to these user groups due to Call
Forwarding will be carried out only once the call forwarding time has elapsed.
• It is not possible to divert these UG subscribers to the special user groups. This
applies even if the subscriber logs out of the UG beforehand.
• Only the user group element "Subscriber group" is available.
• "Global" call distribution is not available.
• DECT subscribers are not allowed.
The following applies in particular for the Voice Mail user group:
• Communications with a Voice Mail server via the V.24 interface works only
with the Voice Mail user group.
To Next Page
Loading...
