Ascotel IntelliGate 2025/2045/2065
838 AIMS configuration tool Part 5
2.2.1 Connection options for internal access
The internal access to the PBX configuration is possible via S or AD2 user-network
interfaces or via one of the two V.24 interfaces of the basic system. The V.24
interface settings are made via the AIMS Configuration Manager.
Note:
The two V.24 interfaces of the basic system have different initialization
value settings (see "V.24 Interface", page 788).
[1] PC on Terminal Adapter
[2] PC with ISDN card on S user-network interface
[3] PC on Pocket Adapter
[4] PC directly on the basis system
Fig. 5.2: Connection options for internal access for PBX configuration
Cables for internal access
• For [1], supplied Terminal Adapter cable
• For [3] Pocket Adapter cables (see "V.24 interface on the Pocket Adapter (PA)",
page 790)
• For [4] V.24 cable (see "V.24 Interface", page 788)
TA
S V.24
SS
V.24 V.24
AD2 V.24
PBX
configu-
ration
haz0761aaenb0
PA
[1]
[2]
[3]
[4]
PC/T
COM
port
PC/T
COM
port
PC/T
COM
port
PC
ISDN
card
To Next Page
Loading...
