Ascotel IntelliGate 2025/2045/2065
Part 7 Operations supervision 941
Event messages menu item
Tab. 7.21: Event messages display
The event messages are identical to the displays obtained when entering the con-
figuration with System Assistant (Office 45). They are stored in event table 4 (see
"Event message concept", page 913). The entries in the Maintenance menu
remain stored until they are deleted with the "Delete" command.
Remarks
• The display on the event message header line ("1") indicates the number of
event messages that have occurred (max. 255). You can use the cursor keys to
scroll through the lines (not visible)(e.g.4 events 1/2: 2 events on page 1,2
events on page 2)
• The last 254 entries can be displayed.
• The event entries record only the time of the error incident, not the time at
which it was remedied.
• More detailed information on triggering and printing event messages can be
found in "Event message concept", page 913.
See also:
Event messages can also be called up in the AIMS Fault & Maintenance
Manager (see "Signal destination Event Log", page 928).
4.5.2 AD2 Monitor pro
Fig. 7.15: Front view of the AD2 Monitor pro
== EVENT MESSAGES
01.12.98 00:01 OUTGOING CALL REJECTED TO LINE: 12.25
02.12.98 09:15 TOO MANY EVENT MESSAGES
Monitor
Key
Int.
Ext.
PBX
Term.
A
B
AD2-Monitor pro
Ch1 Ch2
Power
Reset RxD TxD
Frame Error
Operating mode keys LEDs
haz1237aaena0
To Next Page
Loading...
