Ascotel IntelliGate 2025/2045/2065
Part 5 AIMS configuration tool 843
5. Set TCP / IP for dial-up networking:
– activate "Obtain an IP address automatically".
– Deactivate IP header decompression.
– Deactivate standard gateway.
Setting Up dial-up networking for dial-up access
The following configuration is required for internal or external dial-up access.
1. Create a new dial-up connection (e.g. "Ascotel ISDN").
2. Select the configured ISDN modem.
3. Enter the connection number:
– Internal access: 898
– External access: Local network code, call number and if necessary country
code of the PBX requiring maintenance
4. Select client protocol "TCP / IP".
5. Set the other parameters (depending on the Windows version):
– Deactivate software decompression.
– Deactivate LCP expansion
6. Set TCP / IP for dial-up networking:
– activate "Obtain an IP address automatically".
– Deactivate IP header decompression.
– Deactivate standard gateway.
2.4 Configuration with AIMS
With AIMS the configuration of a PBX can be directly loaded and processed. The
complete configuration of a PBX can also be created on the PC without access to
the PBX and stored in the database. The prepared configuration can then be
loaded on to the PBX.
Setting Up the connection
1. Open the AIMS Shell.
2. Select the PBX.
3. Under "PBX: Online Connection" select "Local Access", "Dial-up Access" or
"LAN".
To Next Page
Loading...
