Aastra Ascotel IntelliGate 2025 - 4.3 Operating state and error displays; 4.3.1 Status display - basic system

Ascotel IntelliGate 2025/2045/2065
930 Operations supervision Part 7
If you want a beep or melody to signal that the SEM Server has received an event
message, make the appropriate setting in the SEM Configurator.
SEM Server
The SEM Server receives event messages from PBX systems and stores all the
important data in the corresponding AIMS databases.
For the program to operate correctly, there has to be at least one AIMS database.
SEM Viewer
The SEM Viewer is used to edit the event messages stored by the SEM Server; they
can then be filtered, sorted, printed or written into a file according to, for
example , status, customer, PBX or priority.
The SEM Viewer can also be used to set, for each AIMS database, the way in
which the SEM Server should respond to an event message (e.g. send e-mail, print
out on a printer).
4.3 Operating state and error displays
4.3.1 Status display – basic system
The mainboard has a 7-segment display which indicates the system's current
operating state, depending on the mode selected.
The main operating state displays in normal mode are listed below. The HEX
rotary switch has to be on position 0, 2 or 5. A description of the various HEX
rotary switch positions can be found in "Switch positions of the HEX rotary
switch", page 935.