Ascotel IntelliGate 2025/2045/2065
Part 2 Features 555
Phone booth operation, variant 3
Subscriber 29, who does not have exchange access authorization, picks up the
receiver and dials the operator’s number (11). He asks for a trunk line and puts
down the receiver.
Fig. 2.220: Signalling on the Operator Console with variant 3 of phone booth operation
Operating sequence on the Operator Console:
• Press function key (*32 configured)
• Suffix dial 29 or wait 2 seconds
• Press the End key
As a call is signalled, the subscriber in the phone box picks up the receiver, obtains
a dial tone and dials.
When the call in the phone box is completed the charge recall signal rings on the
Operator Console and the call charge information is displayed in the same way as
in variant 1 or 2 (possibly with a delay depending on the configuration).
8.7.6 Menu and operating concept with AIMS
Hotel features can be configured using AIMS subject to the following require-
ments:
• The PBX is connected to a PC on which AIMS has been installed (see "Access
concept", page 151).
• The Hotel Manager is activated (see "AIMS Managers", page 146).
I: Call from subscriber 29 07:46
I: Function key charge recall (*32) 07:47
-- Line key 1...5 _________________o__
*3245 THU 28. SEP 2000
Enquiry call DTMF Park Message
haz1249aaena0
To Next Page
Loading...
