Ascotel IntelliGate 2025/2045/2065
Part 2 Features 483
Procedures
Tab. 2.195: Intrusion: Suffix dialling procedures
Tab. 2.196: Intrusion: Prefix Dialling Procedures
System configuration
Tab. 2.197: Intrusion: System configuration
Reference to Other Features
8.4.5 Announcement to one or more subscribers
The announcement feature allows subscriber A to address subscriber B (or a
group of subscribers) directly via the loudspeaker on B’s terminal, without waiting
for his answer. Subscriber B has the possibility to answer the announcement (in
which case the announcement is converted into a normal, internal connection) or
to interrupt it (clear down the connection).
System Terminals a/b terminal
Activate intrusion • Use digit suffix dialling: 7
• Procedure: *44
R7 or *44 (R = control key)
Answer without hold → End call and
answer other subscriber
•
• Use digit suffix dialling: 1
R1
Answer with hold → Hold call and
answer other subscriber
•
• Use digit suffix dialling: 2
R2
Answer with conference → Include
other subscriber in the current call
•
• Use digit suffix dialling: 3
R3
Reject → Continue with original call •
• Use digit suffix dialling: 0
R0
*/# procedure
Protect own set against intrusion *04
Allow intrusion on own set #04
Parameter Parameter value Remarks
Intrusion Yes Subscriber Configuration
Call waiting / intrusion on exchange connection Yes / No Throughout the system
Conference / intrusion / call waiting tone On / off / only once Throughout the system
Features:
• "Call waiting", page 477
• "Hold (enquiry call)", page 460
• "Conference", page 465
To Next Page
Loading...
