Ascotel IntelliGate 2025/2045/2065
Part 3 Planning a private network 685
You need to set the trunk groups for a private network:
4. Select the following settings in the trunk group configuration for trunk
groups 4 and 5 of all the systems:
– Network type = private
– Protocol = PSS1
Name the trunk groups as an orientation aid:
5. Name the trunk groups of system 1:
– Trunk group 1-4: Name = PINX 2
– Trunk group 1-5: Name = PINX 3
6. Name the trunk groups of systems 2 and 3:
– Trunk group 2-4: Name = PINX 1
– Trunk group 3-4: Name = PINX 1
6.2.2.2 Creating the exchange trunk group
An exchange trunk group is created in system 1 for the lines leading to the public
network:
1. Create a trunk group in system 1 with the line to the public network
(trunk group 1-1).
You need to set the exchange trunk group for the public network:
2. Select the following settings in the trunk group configuration of trunk
group 1-1:
– Name = public network
– Network type = public
– Protocol = DSS1
To Next Page
Loading...
