Ascotel IntelliGate 2025/2045/2065
824 Installing terminals Part 4
Fig. 4.86: Installation on the ZTF as shown in the example of the Office 40
If the ZTF is connected to an Office 30 , the LEDs will be lit red. If the ZTF is con-
nected to an Office 40, the LEDs will be lit red and green.
8.1.4 Audio
Audio is used in connection with Office terminals whenever:
• A monitoring facility is required via a second handset (Microtel MT)
• A monitoring facility is required via an external loudspeaker
• A call is to be recorded using recording equipment
Note:
National laws governing the recording of phone calls must be observed.
Recording with Audio must always be started/ stopped manually
(even when using voice-actuated recording equipment). Otherwise
there is a risk that office conversations will be recorded even when the
handset is on-hook (idle).
Power supply
An external plug-in power supply unit (9 VDC) is supplied as the power supply for
Audio.
Connection and views of the equipment
Audio is connected to the terminal between Microtel (MT) and the hand-
set socket.
X4
haz0056aaxxa0