Ascotel IntelliGate 2025/2045/2065
Part 7 Operations supervision 939
3. Press one key after the other.
Only the LED of the key pressed in each case lights up.
4. To exit the self-test mode, unplug then reconnect the terminal connecting
line.
Should any irregularities occur during the self-test, contact a specialist.
4.5 Other aids
4.5.1 Maintenance menu on the Office 45
The System Assistant function under the "Maintenance" menu item on the
Office 45 can be used to retrieve system information which in the event of a mal-
function provides important clues as to the cause of the fault:
Tab. 7.16: "Maintenance" menu selection:
You can select from the following menu items:
1. System status
2. System failures
3. Mains voltage failures
4. Event messages
System status menu item
Tab. 7.17: Display of the system status lines
The system status lines provide useful information for a more in-depth fault diag-
nosis. They can be printed out and sent to customer support on request.
1: View 3: Delete
2: Print 4: Both
== SYSTEM STATUS
BCS: 00000 CC: 00000
SUBS: 0011 NSUB: 0000 LINE: 0001
DIST: 0001 DDIN: 0000 ABB: 1000
Back with [<-- | ]