Ascotel IntelliGate 2025/2045/2065
Part 2 Routing elements 245
User group 30 - 99
DECT group calls are not possible with user groups 30 - 99 (available only with
the 2065 system), i. e. only one DECT terminal is allowed per user group.
Application example for a user group
In the call distribution pattern, general bell has been configured with a delay;
along with the Operator Consoles. This means that if the Operator Consoles is
overloaded the general bell will also start to ring after the configured ringing time
(e.g. 3 ringing cycles). The call can then be taken from any terminal.
Other Subjects Related to the User Group:
Call distribution, Subscriber configuration, Operator Consoles, General
bell, Internal traffic, Incoming traffic, User group: logging in and out,
Numbering plan.
To Next Page
Loading...
