Ascotel IntelliGate 2025/2045/2065
260 Routing elements Part 2
Note:
If a KT cost centre is entered in the call distribution element and a sub-
scriber cost centre in the subscriber configuration, the call charges are
allocated to both cost centres. This means the total sum of the call is
allocated twice.
Application Examples for Key Telephones
Destination Combination KT+UG
The combined destination KT line and user group 5 has been configured in call
distribution element 1 with number 200 in the numbering plan.
Two line keys are connected to the KT line 1/1 It is therefore a through KT line The
first key belongs to the key telephone with subscriber number 211; the second
belongs to the key telephone with subscriber number 221.
The element "Operator Console" is configured on user group 5. Internal sub-
scriber 291 is entered as member of the subscriber group. Delay is activated for
both elements (Operator Consoles and Subscriber).
Fig. 2.53: Application for key telephones and user group
Operator console
Subscriber 291
User
group 5
211 221
KT line 1/1
-> UG 5 + KT
Call distribution 1
Direct dialling plan 1
200
DDI No. 20
-> Call distribution 1
200
250
haz0722aaena0
222 22 20
To Next Page
Loading...
