Aastra Ascotel IntelliGate 2025 - Page 276

Ascotel IntelliGate 2025/2045/2065
276 Call Routing Part 2
Direct Routing
A call without direct dialling is routed directly to a destination of the internal num-
bering plan.
Fig. 2.64: Routing a call from the private leased-line network without direct dialling
Tab. 2.30: Setting the routing parameters
Call distribution element 3:
• Destinations Switching position 1: SC 220 + KT
• Incoming connections Number of connections allowed simultaneously
Parameter Parameter value
Trunk group 2:
• Network interfaces Network interfaces in this trunk group
• Incoming connection Number of connections allowed simultaneously
• Network type Private
• Protocol QSIG or QSIG / PSS1 ISO
Parameter Parameter value
Network
connections
Trunk group 1 (DSS1)
-> Call distribution 1
-> Direct dialling plan 1
60 220
DD No. -
DD No. 20
-> Call distribution 2
Trunk group 2 (PSS1)
-> Direct dialling plan 2
Direct dialling plan 1
Direct dialling plan 2
Call distribution 1
Call distribution 2
Call distribution 3
1/n
220
Subscriber
KT line
Switchover
T
T2
-> SC 220 + KT
-> SC 220 + KT
-> SC 220 + KT
2/n
220
3/n
220
T
T2
Se
220
a/b
PINX 1
PINX 1
PINX 2
haz0730aaena0
PISN
Exchange