Aastra Ascotel IntelliGate 2025 - Page 395

Ascotel IntelliGate 2025/2045/2065
Part 2 Call logging (CL) 395
Fig. 2.136: Destination number outgoing
Time To Answer (TTA response time)
In the case of calls transferred internally the call time is logged at the transferred
subscriber. The amount of time from the start of the ringing phase to the answer-
ing of a direct call is entered here (in seconds).
In the case of unanswered calls the ringing time is logged. Rejected calls are given
TTA = 0.
Sequence number
Transferred calls have the same sequence number but separate serial numbers.
Each incoming call is allocated a sequence number. However, since not all calls
are necessarily logged (logging may be deactivated individually per network inter-
face or call distribution element), the numbering is not necessarily continuous.
Serial number
The serial number is incremented by 1 each time an incoming or outgoing call is
logged.
• After initialization the serial number is reset to the value 0.
• The serial number is not reset after a normal start.
• The serial number cannot be set manually.
PINX 1
Region 60
032 624 33 00
032 624 33 99
Dest. No. 1: 107990326243354
Dest. No. 2: 032 624 33 54
Dest. No. 1: 032 624 33 54
Dest. No. 2: 032 624 33 54
Subscriber No. 300
dials 0 - 032 624 33 54
PINX 1 dials:
107990326243354
Call
Logging
PC
Call
Logging
PC
DDI:54
haz0609aaena0
PBX
PINX 2
Region 50