Aastra Ascotel IntelliGate 2025 - Page 511

Ascotel IntelliGate 2025/2045/2065
Part 2 Features 511
Procedures
Tab. 2.241: Phone lock: Procedures
System Configuration
Tab. 2.242: Phone lock: System configuration in AIMS
Tab. 2.243: Resetting the password with AIMS or Office 45
Unlocking the terminal for each call
Unlocking the terminal for each call allows the authorized user to enable any
locked terminal system so that he can make a single outgoing call.
After unlock procedure #36 the user dials his own internal subscriber number and
his personal password. This activates the digit barring settings of his subscriber
*/# procedure System Terminals
Activate phone lock with new pass-
word
*33 <Password> Office 40, Office 45
• With the code key
System terminals with display:
• (*33 does not work)
Activate phone lock with the pass-
word last used
*33#
Deactivate phone lock #33<Password> (#33 does not work)
Change password *47 <old password> * <new pass-
word> * <new password> #
1)
1)
For reasons of data protection no entry is made in the redial register.
The "Change password" feature can be remote-controlled, which means it can
also be used for virtual subscribers (see "Remote control features", page 542).
System terminals with display:
(*47 also works)
Parameter Parameter value Remarks
Change terminal pass-
word
Yes / No Setting per subscriber in the subscriber
authorization
Internal digit barring set-
tings for the unlocked
state
Enable *33 and #33 Allow phone lock locking variant
Internal phone lock Internal digit barring 1 to 8 Definition of internal dialling possibilities in
the locked state
External phone lock External digit barring 1 to 8 Definition of external dialling possibilities in
the locked state
Parameter Parameter value Remarks
Telephone barring Off Deactivate phone lock without password
Password 0000 Resets the password