Ascotel IntelliGate 2025/2045/2065
532 Features Part 2
Fig. 2.210: MCID during the call
Detailed Description
This function provided by the network provider as a supplementary service is used
for identifying malicious or nuisance callers. The identification is effected by the
network provider. The feature is activated by the subscriber.
Suppressing the outgoing number (CLIR) does not protect the caller from identi-
fication of his subscriber number by the network provider.
The following data is recorded by the network provider:
• Calling party’s phone number
• Called party's phone number
• Date and time of the call
Tab. 2.274: Recording of malicious calls
Interface Operating sequence / signalling on the terminal Scope
B Activate during the call / after the call during
the busy tone signalling
1)
.
Network provider confirms activation (the type
of signalling is specific to the network provider)
1)
The duration of the busy tone signalling after the call depends on the network provider.
internal subscriber
Connection restrictions:
• Only for external incoming connections
• In hands-free mode, activation is practi-
cally possible only during the call as sys-
tem terminals hang up automatically
within a few seconds of the end of the
call.
A External subscriber
PBX
MCID recording table
Subscriber No. Connection
Caller's Called party Date Time
32 987 65 43 32 123 41 23 15-10-00 12:34
32 987 65 43 32 123 41 23 16-10-00 12:42
32 987 65 43 32 123 41 23 18-10-00 12:35
A
B
32 987 65 43
32 123 41 23
ISDN
haz1235aaena0
To Next Page
Loading...
