Ascotel IntelliGate 2025/2045/2065
Part 3 Planning a private network 687
These properties are set in the configuration to the routes:
1. In system 1 select the settings for routes 1-6 and 1-7:
– Numbering plan identifier (NPI) = PNP
– Digit barring = no
2. In system 2 select the settings for routes 1-5 and 1-7:
– Numbering plan identifier (NPI) = PNP
– Digit barring = no
3. In system 3 select the settings for routes 1-5 and 1-6:
– Numbering plan identifier (NPI) = PNP
– Digit barring = no
Settings for the routes to the public network
All the call numbers of calls to the public network are external numbers. As such
they must
• either comply with numbering plan identifier E.164 or
• be preceded by an exchange access prefix.
In addition they should be checked by an external digit barring if required.
These properties are set in the configuration for the routes.
Variant 1:
1. In system 1 select the settings for route 1-1:
– Numbering plan identifier (NPI) = E.164
– Digit barring = yes
2. In system 2 select the settings for route 2-1:
– Numbering plan identifier (NPI) = E.164
– Digit barring = yes
3. In system 3 select the settings for route 3-1:
– Numbering plan identifier (NPI) = E.164
– Digit barring = yes
To Next Page
Loading...
