Aastra Ascotel IntelliGate 2025 - Page 820

Ascotel IntelliGate 2025/2045/2065
820 Installing terminals Part 4
Fig. 4.82: Fit the connecting cable as shown in the example with the Office 45
Note:
The total length of the cables from the PBX to the Office terminal must
not be less than 10 m.
Expansion keypad (EKP) for Office 35 and Office 45
The EKP adds 10 configurable keys to an Office 35 / Office 45. Up to three EKP
can be connected to each terminal. If an alpha keyboard is connected, only two
other EKPs can be connected.
The EKP contains a connection socket for another EKP or the alpha keyboard.
Installation and commissioning
1. Unplug the terminal cable from the socket.
2. Plug the connecting cable of the expansion keypad into the socket for supple-
mentary equipment on the underside of the terminal or EKP.
3. Feed the connecting cable through the strain relief.
4. If required, secure the EKP to the terminal or EKP (see Fig. 4.83).
5. Plug the terminal connecting cable into the socket.
haz1259aaena0
AD2 Interface