ACES SYSTEMS Cobra II User Manual

Gen II User Manual
3-6 – Using the Gen II Analyzer Chapter 3 Revision 2.10, April 20
 From the Analyzer Management menu, select “Database Management.”
 Select “Import Setups from USB Drive” and press [OK].
 If an existing setup with the same name as the setup you are importing exists, you will be
asked if it is ok to overwrite this file. Once complete you will be presented an “Import
Results” screen as shown below.

ACES SYSTEMS Cobra II Specifications

General

Brand	ACES SYSTEMS
Model	Cobra II
Category	Measuring Instruments
Language	English