E6198B/E6218A Switch/Load Unit User Manual xv
List of Tables
1 Legal Information
Table 1-1. Agilent Sales And Support Contact Numbers 1-3
2 Safety and Regulatory Information
Table 2-1. Environment Requirements 2-3
Table 2-2. Safety Symbols and Regulatory Markings 2-5
3 Switch/Load Unit and Plug-In Cards
Table 3-1. Switch/Load Unit Rating (Electrical) 3-2
Table 3-2. Switch/Load Unit Rating (Mechanical) 3-2
Table 3-3. Backplane Connectors for E6198B 3-12
Table 3-4. Backplane Factory Default Connector Settings 3-12
Table 3-5. Breakout Board Connectors 3-13
Table 3-6. J102 Signal Definitions 3-18
Table 3-7. Switch/Load Unit J1 Pinout 3-19
Table 3-8. Switch/Load Unit J2 Pinout 3-19
Table 3-9. Switch/Load Unit J3 Pinout 3-19
Table 3-10. Power Supply Input for each Jumpers 3-20
Table 3-11. Fuses Ratings 3-23
4 Configuring the Switch/Load Unit
5 Using Load Cards and Loads
Table 5-1. Load Card Capabilities 5-2
Table 5-2. Components involved in LEM Module Installation 5-13
6 Using the Pin Matrix Cards
7 Using the Custom Card
A Switch/Load Unit And Card Specifications
B Register Definitions
Table B-1. Standard Registers B-2
Table B-2. Standard Registers B-2
Table B-3. Switch/Load Unit Registers B-4
Table B-4. DAC Scaling Examples B-7
Table B-5. OCout
x
States B-8
Table B-6. Summary of Load Card Register Definitions B-10
To Next Page
Loading...
Need help?
General
