Register Definitions B
E6198B Switch/Load Unit User Manual B-11
Agilent E6175A 8-Channel High-Current Load Card
The Agilent E6175A Load Card is a highly flexible load card for
high-current loads mounted directly on a sheet metal panel
attached to the load card. The card provides current sense (both
resistive and transducer type), pull-up/down, flyback
protection, and bridge load capabilities. The card also provides
Card Type, Card Configuration, and Status readback of the built
in relay timers. See “Using the Agilent E6175A 8-Channel Load
Card" for more information.
Registers definitions for the card follow:
Base+C
h
N/A N/A N/A N/A N/A N/A Load
select
Load
select
Base+D
h
N/A N/A N/A N/A N/A N/A Load
select
Load
select
Base+E
h
N/A N/A N/A N/A N/A N/A Load
select
Load
select
Base+F
h
N/A N/A N/A N/A N/A N/A Load
select
Load
select
Base+10
h
N/A N/A N/A N/A N/A N/A Load
select
Load
select
Base+11
h
N/A N/A N/A N/A N/A N/A Load
select
Load
select
Base+12
h
N/A N/A N/A N/A N/A N/A Power
select
Load
select
Base+13
h
N/A N/A N/A N/A N/A N/A Power
select
Power
select
Base+14
h
N/A N/A N/A N/A N/A N/A Power
select
Power
select
N/A indicates the card does not have a register at that offset address.
Table B-6 Summary of Load Card Register Definitions (continued)
Register
Offset
E6175A
8-Ch.
E6176A
16-Ch.
E6177A
24-Ch.
U7177A
24-Ch.
E6178B
8-Ch.
N9377A
16-Ch.
N9378A
24-Ch.
N9379A
48-Ch.
To Next Page
Loading...
Need help?
General
