REQUIREMENTS
The job assistant is enabled; see page 45
1. Select in the job menu.
The job assistant will be shown.
2. Select the desired menu in the job menu.
The job assistant shown the information on the
selected menu.
3
Using the quick start
The quick start enables the automation of work
procedures.
In this way, repetitive settings do not need
to be entered manually.
REQUIREMENTS
Quick start is enabled; see page 45
Quick start is configured; see page 47
Select in the job menu.
The configured work procedure will be started.
4
Editing master data
In the menus to select the master data, the master data
can also
be created, edited or deleted.
The master data includes the following data:
Customer data
Farm data
Worker data
Field data
Product data
Crop data
Comment templates
047516
048300
I | Managing jobs | Using the quick start
MG5574-EN-II | B.1 | 25.10.2016
114
To Next Page
Loading...
