Amazone AMAPAD - Troubleshooting; Error Codes and Measures

or
disable
or
delete.
NOTE
Disabled start screens cannot be selected.
1.3 Selecting global start screens
NOTE
The selection procedure can be configured in the
setup
menu; see page 35.
Depending on the setting in the setup menu:
Tap on the multi-function button until the desired
start screen appears
or
Select the desired start screen from the menu.
2
Taking screenshots
The multi-function button can be used to take a picture
of the current user interface and save it to a USB flash
drive.
REQUIREMENTS
Function is enabled in the setup menu; see
page
35
002561
002959
S | Using the multi-function button| Taking screenshots
MG5574-EN-II | B.1 | 25.10.2016
220