Using automatic reverse drive detection
O
The automatic reverse drive detection determines
whether
the vehicle is driving in reverse. When reverse
driving is detected, the vehicle symbol also moves
backwards on the map. Without automatic detection of
reverse driving, the vehicle symbol turns around when
driving in reverse.
NOTE
Automatic detection of reverse driving must be
enabled
in the setup menu; see page 44.
1. Drive the vehicle in reverse.
The button for automatic detection of reverse driving
turns yellow:
2. When t
he direction of movement of the vehicle
symbol does not concur with the direction of
movement of the vehicle,
tap on
.
005245
O | Using automatic reverse drive detection |
MG5574-EN-II | B.1 | 25.10.2016
183
To Next Page
