8. Drive to the end of the row.
9. Set the end point of the A-B line with .
The AMAPAD will automatically add the other track
lines.
1.2.1 Creating the A-B line manually
The coordinates of the starting point and end point of the
A-B line can be
entered manually. The coordinates can
come from a Farm Management Information System or
from a leading vehicle.
REQUIREMENTS
Field is created; see page 127
Track line pattern for A-B lines is selected; see
page
147
1. In the job menu, tap on
.
2. Open the "New track" menu with
.
3. Enter the track name.
4. Confirm with .
The symbol for setting the starting point is shown:
.
5. Open the track line menu with .
6. Open the menu for entering the coordinates with
.
002047
K | Using track lines | Creating track lines
MG5574-EN-II | B.1 | 25.10.2016
149
To Next Page
Loading...
